Calico Networking
We'll be using Calico for our CNI. You might want to check for the latest version, but installation is as simple as this on your master node:ubuntu@k8s-master:~$ kubectl apply -f https://docs.projectcalico.org/manifests/calico.yamlConfiguration Files
I'm going to setup all of the required configurations at once. There are a few required:CPI Config Map
Hopefully this makes sense. We're going to reference a secret called vsphere-credentials, which we'll create in a moment, and under the virtual center with the IP listed, kubernetes is deployed within the data center Vancouver.
ubuntu@k8s-master:~$ cat vsphere.conf
[Global]
port = "443"
insecure-flag = "true"
secret-name = "vsphere-credentials"
secret-namespace = "kube-system"
[VirtualCenter "10.9.178.236"]
datacenters = "Vancouver"
ubuntu@k8s-master:~$ kubectl create configmap cloud-config --from-file=vsphere.conf --namespace=kube-system
Again, this should be pretty simple. I was hoping to use base64 encoding for the username and password as it gets around any special character problems but I can't seem to get that working. The best I can come up with is single tick marks, so if one of those is in your password or username you'll need to figure that out (or change it). This becomes a bigger problem with the CSI configuration below, so read ahead if you've got lots of special characters in your password.
ubuntu@k8s-master:~$ cat vsphere-credentials.yaml
apiVersion: v1
kind: Secret
metadata:
name: vsphere-credentials
namespace: kube-system
stringData:
10.9.178.236.username: 'domain\mengland'
10.9.178.236.password: 'lJSIuej5IU$'
ubuntu@k8s-master:~$ kubectl create -f vsphere-credentials.yaml
ubuntu@k8s-master:~$ cat csi-vsphere.conf
[Global]
cluster-id = "k8s-cluster1"
[VirtualCenter "10.9.178.236"]
insecure-flag = "true"
user = "mengland@itlab.domain.com"
password = "lJSIuej5IU$"
port = "443"
datacenters = "Vancouver"
ubuntu@k8s-master:~$ kubectl create secret generic vsphere-config-secret --from-file=csi-vsphere.conf --namespace=kube-system
Deploy CPI and CSI
Once those are completed, you need to create the roles and deploy the CPI and CSI as follows:ubuntu@k8s-master:~$ kubectl apply -f https://raw.githubusercontent.com/kubernetes/cloud-provider-vsphere/master/manifests/controller-manager/cloud-controller-manager-roles.yaml
ubuntu@k8s-master:~$ kubectl apply -f https://raw.githubusercontent.com/kubernetes/cloud-provider-vsphere/master/manifests/controller-manager/cloud-controller-manager-role-bindings.yaml
ubuntu@k8s-master:~$ kubectl apply -f https://github.com/kubernetes/cloud-provider-vsphere/raw/master/manifests/controller-manager/vsphere-cloud-controller-manager-ds.yaml
ubuntu@k8s-master:~$ kubectl describe nodes | egrep "Taints:|Name:"
Name: k8s-master
Taints: node-role.kubernetes.io/master:NoSchedule
Name: k8s-worker
Taints:
ubuntu@k8s-master:~$ kubectl get pods -n kube-system
NAME READY STATUS RESTARTS AGE
calico-kube-controllers-648f4868b8-lbfjk 1/1 Running 0 3m57s
calico-node-d7gkh 1/1 Running 0 3m57s
calico-node-r8b72 1/1 Running 0 3m57s
coredns-6955765f44-rsvhh 1/1 Running 0 20m
coredns-6955765f44-sp7xv 1/1 Running 0 20m
etcd-k8s-master7 1/1 Running 0 20m
kube-apiserver-k8s-master7 1/1 Running 0 20m
kube-controller-manager-k8s-master7 1/1 Running 0 20m
kube-proxy-67cgt 1/1 Running 0 20m
kube-proxy-nctns 1/1 Running 0 4m30s
kube-scheduler-k8s-master7 1/1 Running 0 20m
vsphere-cloud-controller-manager-7b44g 1/1 Running 0 71s
ubuntu@k8s-master:~$ kubectl logs -n kube-system vsphere-cloud-controller-manager-7b44g
ubuntu@k8s-master:~$ kubectl apply -f https://raw.githubusercontent.com/kubernetes-sigs/vsphere-csi-driver/master/manifests/v2.0.0/vsphere-67u3/vanilla/rbac/vsphere-csi-controller-rbac.yaml
ubuntu@k8s-master:~$ kubectl apply -f https://raw.githubusercontent.com/kubernetes-sigs/vsphere-csi-driver/master/manifests/v2.0.0/vsphere-67u3/vanilla/deploy/vsphere-csi-controller-deployment.yaml
ubuntu@k8s-master:~$ kubectl apply -f https://raw.githubusercontent.com/kubernetes-sigs/vsphere-csi-driver/master/manifests/v2.0.0/vsphere-67u3/vanilla/deploy/vsphere-csi-node-ds.yaml
Check Status
At this point you should have a running CPI and CSI implementation with some checks to verifyubuntu@k8s-master:~$ kubectl get pods -n kube-system
NAME READY STATUS RESTARTS AGE
calico-kube-controllers-648f4868b8-lbfjk 1/1 Running 0 3d2h
calico-node-d7gkh 1/1 Running 0 3d2h
calico-node-r8b72 1/1 Running 0 3d2h
coredns-6955765f44-rsvhh 1/1 Running 0 3d2h
coredns-6955765f44-sp7xv 1/1 Running 0 3d2h
etcd-k8s-master7 1/1 Running 0 3d2h
kube-apiserver-k8s-master7 1/1 Running 0 3d2h
kube-controller-manager-k8s-master7 1/1 Running 0 3d2h
kube-proxy-67cgt 1/1 Running 0 3d2h
kube-proxy-nctns 1/1 Running 0 3d2h
kube-scheduler-k8s-master7 1/1 Running 0 3d2h
vsphere-cloud-controller-manager-7b44g 1/1 Running 0 3d2h
vsphere-csi-controller-0 5/5 Running 0 146m
vsphere-csi-node-q6pr4 3/3 Running 0 13m
ubuntu@k8s-master:~$ kubectl get csidrivers
NAME CREATED AT
csi.vsphere.vmware.com 2020-01-04T00:48:57Z
ubuntu@k8s-master:~$ kubectl describe nodes | grep "ProviderID"
ProviderID: vsphere://a8f157cf-3607-43a2-8209-60200817677f
ProviderID: vsphere://0c723a5d-cb66-4aae-87d2-7fe673728fee
Likely Problems
If some of the pods aren't ready, you've got problems. The biggest one I had was a permission problem when trying to load CSI. The CSI driver uses a secret created from a configuration file instead of straight YAML. I'm not sure if that's part of the problem but it seems to have problems with backslashes and potentially other special characters. This means you can't have an account with domain\user format and can't have any backslashes in your password. The error looks like this:ubuntu@k8s-master:~$ kubectl logs -n kube-system vsphere-csi-controller-0 vsphere-csi-controller
time="2020-01-06T21:45:27Z" level=fatal msg="grpc failed" error="ServerFaultCode: Cannot complete login due to an incorrect user name or password."
If you need to reload your CSI secret file you can do so like this:
ubuntu@k8s-master:~$ kubectl delete secret -n kube-system vsphere-config-secret
ubuntu@k8s-master:~$ kubectl delete statefulset -n kube-system vsphere-csi-controller
ubuntu@k8s-master:~$ kubectl create secret generic vsphere-config-secret --from-file=csi-vsphere.conf -n kube-system
ubuntu@k8s-master:~$ kubectl apply -f https://raw.githubusercontent.com/kubernetes-sigs/vsphere-csi-driver/master/manifests/1.14/deploy/vsphere-csi-controller-ss.yaml
Using Storage
First off, the fancy Cloud Native Storage for persistent volumes seems to only apply if you have VSAN, so break out your cheque book. For the rest of us, you will need to create a Storage Policy, in my case I did this based on tags. Basically, you create the tag, assign it to whatever datastores you'd like to use and then create the policy based on that tag.Once that's done, we still need to define a storage class within the kubernetes cluster. This is similar when we added a storage class in my original blog post but we no longer need to specify a disk format or datastore target. Instead, we just reference the created storage policy, in my case, I called it k8s-default. The name of the storage class, in this example, vsphere-ssd, is what the rest of the kubernetes cluster will know the storage as. We also define this as the default so if a user doesn't request the storage name, this is what they get.
ubuntu@k8s-master:~$ cat vmware-storage.yaml
kind: StorageClass
apiVersion: storage.k8s.io/v1
metadata:
name: vsphere-ssd
annotations:
storageclass.kubernetes.io/is-default-class: "true"
parameters:
storagepolicyname: "k8s-default"
provisioner: csi.vsphere.vmware.com
ubuntu@k8s-master:~$ kubectl create -f vmware-storage.yaml
ubuntu@k8s-master:~$ cat pvc_test.yaml
apiVersion: v1
kind: PersistentVolumeClaim
metadata:
name: test
spec:
accessModes:
- ReadWriteOnce
resources:
requests:
storage: 5Gi
ubuntu@k8s-master:~$ kubectl create -f pvc_test.yaml
ubuntu@k8s-master:~$ kubectl get pvc
NAME STATUS VOLUME CAPACITY ACCESS MODES STORAGECLASS AGE
test Bound pvc-bf37afa8-0065-47a9-8c7c-89db7907d538 5Gi RWO vsphere-ssd 32m
Storage Problems
If, when you try to attach a PV to a pod you get a message like this:Warning FailedMount 8s (x7 over 40s) kubelet, k8s-worker2 MountVolume.MountDevice failed for volume "pvc-194d886b-e988-48c4-8802-04da2015db4b" : rpc error: code = Internal desc = Error trying to read attached disks: open /dev/disk/by-id: no such file or directory
govc vm.change -vm k8s-worker2 -e="disk.enableUUID=1"
